Why Does My Sewing Machine Keep Jamming?
Author: Sifat Muntasir
If your sewing machine keeps jamming, it can be frustrating and even cause you to abandon your project altogether. Before you give up, though, it’s important to understand that there are a few different reasons why this may be happening.
One common reason is that the sewing machine needle is not positioned correctly. Another possibility is that the tension on the thread is too loose or too tight. Additionally, if your sewing machine is not properly lubricated, this can also cause jams.
In this blog post, we’ll explore each of these potential causes in more detail so that you can troubleshoot the issue and get back to sewing!
All the Reasons Why Your Sewing Machine Keep Jamming?
There are several reasons why your sewing machine might keep jamming. Below, we’ll explore some of the most common causes.
1. The Sewing Machine Needle Is Blunt
One of the most common reasons why a sewing machine needle may start to jam is because it has become blunt. Over time, even the highest quality needles will eventually become dull and need to be replaced. If you notice your sewing machine needle isn’t penetrating the fabric as easily as it used to, or if you’re having to push and pull the fabric more than usual, it’s probably time for a new needle.
2. The Bobbin Is Inserted Incorrectly into the Sewing Machine
Another possible reason for a sewing machine jam is that the bobbin has been inserted incorrectly. Most sewing machines have a specific way that the bobbin needs to be inserted in order for it to work correctly – if it’s not inserted properly, the machine may jam. Consult your sewing machine manual to make sure you’re inserting the bobbin correctly.
3. The Sewing Machine Stitch Length Is Set Too Short
If you’ve ever tried to sew a seam with the stitch length set too short, you know that it can cause all sorts of problems – including jamming. The rule of thumb is that the shorter the stitch, the more likely it is to jam. So if you’re having trouble with your sewing machine jamming, try setting the stitch length to a longer setting and see if that helps.
4. The Tension of Your Sewing Machine Is Too Tight
The tension might be set too tight, resulting in a sewing machine jam. The thread will be pulled too tightly through the cloth if the tension is too tight, causing the machine to jam. Simply loosen the tension and see if that helps to remedy this problem.
5. Feed Dogs Are Set Too High
The feed dogs are the small teeth on the underside of the presser foot that help to move the fabric through the sewing machine. If they are set too high, they can grab too much fabric and cause the machine to jam.
6. Poorly-Oiled Sewing Machine
Oiling your sewing machine every few weeks can help prevent problems such as jamming. Make sure you follow the manufacturer’s instructions for how often to oil your machine and that you oil all moving parts, not simply the surface.
7. Dirty Or Dusty Sewing Machine
Over time, dust can accumulate and begin to obstruct the machine’s moving components if your sewing machine is kept in a dusty location. This might lead to a variety of issues, including jamming.
8. Defective Sewing Machine
If you’ve tried all of the above and your sewing machine still keeps jamming, it may be time to take it in for servicing. There could be a problem with the timing or another internal issue that a qualified technician will be able to fix.
Hopefully, one of these tips will help you fix your sewing machine jamming problem. But if you’re still having trouble, it’s always a good idea to consult your sewing machine manual or take it to a professional for help.
What Is the Best Way to Install A Bobbin in Your Sewing Machine?
The bobbin is an essential part of the sewing machine, and if you don’t know how to fit it correctly, your sewing machine won’t work properly. Here are some simple instructions on how to fit the bobbin on a sewing machine:
Step 1: Threading the Bobbin onto the Spindle
Start by threading the bobbin onto the spindle of the sewing machine. Make sure that the thread is tight on the spindle so that it doesn’t come loose while you’re sewing.
Step 2: Inserting the Bobbin into the Housing
Next, insert the bobbin into the housing on the side of the sewing machine. There should be a small notch on the side of the housing that lines up with the groove on the bobbin.
Step 3: Pulling the Thread Through the Tension Disc
Once the bobbin is in place, pull the thread through the tension disc on the side of the sewing machine. The tension disc controls how much tension is on the thread, and you want to make sure that it’s not too tight or too loose.
Step 4: Pulling the Thread Through the Needle
Finally, pull the thread through the needle and start sewing! If your bobbin isn’t threaded correctly, your stitches will be loose and uneven.
Step 5: Troubleshooting
If you have any trouble threading the bobbin, consult your sewing machine’s manual for more detailed instructions.
Now that you know how to fit the bobbin on a sewing machine, you’re ready to start sewing! Be sure to practice on some scrap fabric before you start working on your project to get the tension right.
What Is the Best Way to Change the Tension on Your Sewing Machine?
Assuming you would like a guide on how to set the thread tension on a sewing machine:
Step 1: Check Your Machine’s Manual
Each sewing machine is different and therefore has different ways of adjusting the tension. The best way to learn how to adjust the tension on your specific machine is to read the manual that came with it.
Step 2: Clean the Throat Plate and Needle Area
Thread tension can also be affected by lint or debris buildup in the throat plate area (the metal plate located under the needle). To clean this area, remove the throat plate and use a soft brush or can of compressed air to remove any lint or debris. You should also check the needle area for any buildup and clean it as needed.
Step 3: Adjust the Tension Dial
The tension dial is usually located on the top of the sewing machine near the thread path. To increase tension, turn the knob to a higher number; to decrease tension, turn it to a lower number.
Step 4: Test Your Stitches
Once you’ve adjusted the tension dial, sew a few test stitches on a scrap piece of fabric to see if the tension is set correctly. If your stitches are too loose, turn the tension knob to a higher number and try again.
If they’re too tight, turn the knob to a lower number and try again. Repeat this process until you find the perfect tension setting for your machine.
How to Install a Foot Presser on a Sewing Machine?
A step-by-step guide for installing a foot presser on a sewing machine.
Step 1: Disconnecting the Sewing Machine
Start by disconnecting your sewing machine from any power source. This is to ensure your safety while you’re working on the machine.
Step 2: Removing the Presser Foot
Next, remove the presser foot from the machine. You can do this by depressing the release lever on the side of the machine.
Step 3: Taking a Look at the Needle Plate
Once the presser foot is removed, take a look at the needle plate. You’ll see a small metal rod protruding from it. This is known as the foot presser shaft.
Step 4: Sliding On the New Foot Presser
Now, take your new foot presser and slide it onto the foot presser shaft. Make sure that the presser is facing the right direction before doing so.
Step 5: Replacing the Presser Foot
Once the presser is in place, replace the presser foot on the machine. Again, make sure that the presser is facing the right direction before doing so.
Step 6: Reconnecting the Sewing Machine
Finally, reconnect your sewing machine to a power source and test it out. You should now be able to use your device with the new foot presser attached.
How Do You Lubricate Your Sewing Machine?
There are a few things you need to do to make sure your sewing machine is properly lubricated. These include:
Step 1: Checking the Oil Level Regularly
The first step is to check the oil level regularly. This will help you ensure that your machine has enough oil and that it is properly lubricated. You can check the oil level by removing the screw from the top of the needle plate and looking inside. The oil should be at the level of the hole in the needle plate. If it is below this level, you will need to add oil.
Step 2: Adding Oil As Needed
If the oil level is low, you will need to add oil. You can do this by removing the screw from the top of the needle plate and adding oil until it reaches the level of the hole in the needle plate. Once you have added oil, replace the screw and tighten it securely.
Step 3: Cleaning the Oil Reservoir Periodically
It is important to clean the oil reservoir periodically to remove any buildup that may occur. You can do this by removing the screw from the bottom of the reservoir and emptying it out. Once you have emptied it, you can rinse it with soap and water and then dry it thoroughly before adding fresh oil.
Step 4: Changing the Oil Every Few Months or As Needed
You should change the oil every few months or as needed. This will help to keep your machine running smoothly and prevent any problems that may occur from using old oil.
To change the oil, you will need to remove the screw from the bottom of the reservoir and empty it out. Once you have emptied it, you can add fresh oil and then replace the screw.
How to Thread a Sewing Machine Properly?
If you want to start sewing, one of the first things you need to learn is how to thread a sewing machine. It may seem daunting at first, but with a little practice, it will become second nature. Here we will show you how to thread a sewing machine properly, step-by-step.
Before you start, ensure your sewing machine is unplugged, and the power is off. Then, follow these steps:
Step 1: Find the Spool Pin
Find the spool pin on your sewing machine. This is where you will place the spool of thread.
Step 2: Placing the Spool of Thread
Place the spool of thread on the spool pin and pull a few inches of thread off the spool.
Step 3: Wrapping the Thread Around the Tension Disk
Wrap the thread around the tension disk (this is usually located near the spool pin).
Step 4: Inserting the Thread into the First Thread Guide
Take the thread behind the machine and insert it into the first thread guide (this is usually a metal bar with a small hole in it).
Step 5: Pulling It Through the Second Guide
From there, pull the thread down to the needle. There should be a second thread guide above the needle; pull the thread through this guide as well.
Step 6: Turning the Hand Wheel Towards You
Finally, holding onto the end of the thread, use your other hand to turn the hand wheel towards you until the needle lowers all the way into its lowest position. The thread should now be properly threaded through the sewing machine.
Now that you know how to thread a sewing machine, practice a few times to get the hang of it. With a little practice, you’ll be an expert in no time!
How Do You Clean Your Sewing Machine Properly?
If you’ve been using your sewing machine regularly, it’s essential to clean it thoroughly every so often to prevent dirt and debris from buildup. Here is a step-by-step guide on how to clean a sewing machine:
Step 1: Unplugging the Sewing Machine
Unplug the sewing machine from the power source.
Step 2: Remove Them
Remove any thread or fabric that may be attached to the machine.
Step 3: Cleaning the Exterior of the Machine
Use a soft, dry cloth to dust off the exterior of the machine. Pay special attention to the area around the needle and throat plate.
Step 4: Manually for Replacing Any Removable Parts
Take a look at the manual for your specific model of sewing machine to see if there are any other parts that can be removed for cleaning purposes. For example, some machines have a bobbin case that can be removed for cleaning.
Step 5: Cleaning the Interior of the Machine
Use a small brush to remove any dust or debris from the interior of the machine. Pay special attention to the feeding mechanisms and gears.
Step 6: Replacing Any Removable Parts
Once you’ve finished cleaning the interior of the machine, replace any removable parts and reattach any thread or fabric that was removed earlier.
Step 7: Testing the Sewing Machine
Plug the sewing machine back in and test it out to make sure everything is working properly.
Now that you know how to clean a sewing machine, it’s important to remember to do so on a regular basis. A well-maintained machine will last longer and sew more smoothly than one that isn’t properly cared for.
So, what do you do if your sewing machine jams? Well, the first step is to identify the reason. Once you know where the jam is, you can start troubleshooting. In this post, we’ve outlined some of the most common reasons why your sewing machine might be jamming and how to fix them.
Hopefully, this information will help keep your sewing projects on track! Have any questions about threading a sewing machine or tension adjustments? Leave us a comment below, and we’ll be happy to help.